TechniSat DIGITRADIO 51 User Manual

9
9 Advance settings
The advance settings allow you to tailor the DAB/FM radio with a variety of options to
suit you. In order to access advance settings, from DAB or FM mode, press and hold
‘Select/Menu’ button to enter the menu.
9.1 DAB radio mode
Under the advance settings menu, press ‘ < ’ or ‘ > ’ button to scroll through the menu
options. Then stop at your preferred option and press ‘Select/Menu’ button to confirm.
The advance settings menu options are:
- Full scan
- Manual tune
- DRC
- Prune
- System
9.1.1 Full scan
Under the advance settings menu, press ‘ < ’ or ‘ > ’ button to select ‘Full scan’, and
then press ‘Select/Menu’ button to confirm.
Full scan starts automatically. Once a scan is complete, the radio returns to playing
the previously selected station or first station on the list.
Note: If no radio station found, it shows ‘NO DAB STATION’. For a better reception, adjust the antenna
or do the full scan again in another location.
9.1.2 Manual tune
As well as the normal method of scanning, you can also manually tune to a particular
channel/frequency. This can be useful for adjusting your antenna to achieve the best
possible reception and scanning a particular channel to update the stations list.
Under advance settings menu, press ‘ < ’ or ‘ > ’ button to select ‘Manual tune’, and
then press ‘Select/Menu’ button to confirm.
Press ‘ < ’ or ‘ > ’ button to select particular channel/frequency and then press
‘Select/Menu’ button to confirm.
Note: The display shows a live indication of the received signal strength on the selected frequency.
Adjustments to your antenna will affect the received signal strength displayed. The new stations will be
added to station list automatically.
To play the found station, first press and hold ‘Select/Menu’ button to exit manual tune
9.1.3 DRC
If you are listening to music with high dynamic range in a noisy environment (for
example classical music while cooking), you may wish to compress the audio dynamic
range. This makes quiet sounds louder and loud sounds quieter.
Under advance settings menu, press ‘ < ’ or ‘ > ’ button to select ‘DRC’, and then
press ‘Select/Menu’ button to confirm.
Press ‘ < ’ or ‘ > ’ button to select 'DRC off’(default), 'DRC high' or 'DRC low', and then
press ‘Select/Menu’ button to confirm setting.

TechniSat DIGITRADIO 51 Specifications

Audio

audio output	1.5W RMS

Power

power consumption in operation	3 W
standby power consumption	< 1 W
power supply input	DC 6V/500mA
power adapter input	AC 100-240V, 50-60Hz

Frequency Ranges

FM frequency range	87.5-108MHz
DAB frequency range	174.928-239.200MHz

Display

display type	LCD
display resolution	High resolution

Weight and Dimensions

width	150mm
depth	134mm
height	53mm