TechniSat DIGITRADIO 51 User Manual

5
Packing list
DAB/FM digital radio x 1
AC Power adapter x 1
Instruction manual x 1
Software update
The ‘UPDATE’ port on the rear of radio is for service professional only.
5 Steps guide to getting started
Press ’ ’ button to turn radio on.
For DAB
1 Press ‘DAB/FM’ button to select DAB.
2 If this is the first time you use, it will automatically start scanning.
3 Press ‘ < ’ or ‘ > ’ button to find desired station and then press ‘Select/Menu’
button to confirm.
4 Your radio will automatically tune.
5 Adjust volume using ‘- Volume +’ buttons, press ‘Volume –‘ to decrease volume
and press ‘Volume +’ to increase volume.
For FM
1 Press ‘DAB/FM’ button to select FM.
2 To scan for station, press and hold ‘ < ’ or ‘ > ’ button to scan backwards or
forwards.
3 Manual tune stations by pressing ‘ < ’ or ‘ > ’ button to find desired station.
Note: In FM mode you can also tune the station manually by pressing ‘ < ’ or ‘ > ’ button to adjust
the FM frequencies with 0.05MHz up or down respectively.
4 Your radio will automatically tune.
5 Adjust volume using ‘- Volume +’ buttons, press ‘Volume –‘ to decrease volume
and press ‘Volume +’ to increase volume.
Note: During the scanning, the sound will muted automatically.

TechniSat DIGITRADIO 51 Specifications

Audio

audio output	1.5W RMS

Power

power consumption in operation	3 W
standby power consumption	< 1 W
power supply input	DC 6V/500mA
power adapter input	AC 100-240V, 50-60Hz

Frequency Ranges

FM frequency range	87.5-108MHz
DAB frequency range	174.928-239.200MHz

Display

display type	LCD
display resolution	High resolution

Weight and Dimensions

width	150mm
depth	134mm
height	53mm