90 91
DE
EN
FR
NL
5.4.4 Display
Depending on the selected function or option, the display will show the following
information:
Volume
Reception strength
Active source
Station name,
Frequency,
Menu entries
Time
5.4.2 Switching o the device
> By briefly pressing the On/Standby buon you can switch the device to standby
mode. [Standby] appears briefly on the display. The time is shown on the
display. The display brightness in standby mode can be adjusted as described in
Section 10.2.
5.4.3 Seing the volume
> Adjust the volume with the Volume +/- buon. The set volume is shown on the
display by way of a bar diagram.
To Next Page
Loading...
