TechniSat DIGITRADIO 52

104 105
DE
EN
FR
NL
buons. Press SELECT/MENU buon to save.
> Repeat this process to save additional stations.
8.8 Retrieving FM stations from a memory slot
> To retrieve a station that you have already stored in the favourites memory,
briefly press the Favourites memory 3+ buon and select a station slot (1-20)
using the < and > buons. Press the SELECT/MENU buon to play the station.
If no station is saved in the selected station slot, [(empty)] appears on the
display.
Press the Favorites memory 1 or 2 to retrieve the station stored there
immediately.
8.9 Overwriting/deleting a station memory slot
> Simply save a new station in the respective memory slot as described.
When retrieving the factory seings all memory slots are deleted.
With the All Stations seing, the scan stops automatically upon detecting each
available station. This can result in weak stations being played with background
noise.
8.6 Audio seings
> Hold the SELECT/MENU buon down briefly. Use the < or > buons to select the
[Audio seings] item and press the SELECT/MENU buon.
> Use < or > to select the [Stereo available] or [Mono only] item to play back in
stereo or only in mono sound when the FM reception is weak.
> Confirm by pressing the SELECT/ MENU buon.
8.7 Saving FM stations to a memory slot
The station memory can save up to 20 stations in the FM range.
> First select the desired station (see section 8.3, 8.4).
> In order to store this station in a memory slot, hold down the Favourites
memory 1 or 2 buon during playback.
> In order to save a station to the Favourites memories 3-20, hold down the
Favourites memory 3+ buon and then select a memory slot using the < / >