TechniSat DIGITRADIO 52 - Switching off the alarm after it has gone off; Switching off the alarm

108 109
DE
EN
FR
NL
> If you have selected DAB or FM, you can then select whether the station last
listened to or a station on your Favourites list should be played as the alarm
signal. Select the relevant option and press SELECT/MENU to go to the next
seing.
6. Then select how oen the alarm should be repeated. Available for selection:
• Daily: Every day at the set time
• Once: A one time execution
• At weekends; Only on a Saturday and a Sunday
• Work days: Only from Monday to Friday
7. Select the desired alarm volume.
8. Finally, select [ON] to switch the alarm on, or [OFF] to switch the alarm o. Press
SELECT/MENU to save the alarm seing.
> The alarm is set, [saved] appears on the display.
You may need to reset the time aer a power cut. The time can either be
updated manually, via DAB or UKW. See Point 10.1 for further information.
As an example, making seings on Alarm 1 will now be explained. Press the SELECT/
MENU buon to confirm each step of the seing and to skip to the next one. Press the
< or > buons to change an option.
1. Press one of the buons Alarm 1 or Alarm 2 to adjust the two saved alarms.
> [ALARM 1 SET] (for Alarm1) appears on the display.
2. Confirm by pressing SELECT/MENU buon.
3. Set the Time at which the alarm should start (the hour first, then the minutes).
Press SELECT/MENU to go to the next seing.
4. Set the Duration the Alarm alarm should sound for (15, 30, 45, 60, 90Min)
5. Select the Source, which should be used as the alarm signal (available sources
DAB, FM and Buzzer.)