22 23
EN
FR
IT
NL
NW
DK
PL
CZ
SK
4.3.2 Improving the antenna reception
The number and quality of the stations to be received depend on the reception conditions at the installation
location. Excellent reception can be achieved with the DAB/FM rod antenna.
> Remove the telescopic antenna from its holder, align it and extend it.
It is oen important to ensure the exact alignment of the antenna, in particular on the outskirts of the
DAB reception area. You can quickly find the location of the nearest transmission mast on the Internet at,
for example,www.dabplus.de.
Start the first scan at a window in the direction of the transmission mast.
When the weather conditions are poor, DAB reception may be limited.
Using the signal intensity display in the status bar, you can find the optimum antenna alignment and,
if required, the best installation location.
4.3.3 Connecting external antennas
With the aid of the assembly key (item number 0000/3445), you can remove the factory-mounted antenna
and connect another suitable antenna (e.g. 0000/6022).
Always follow the indications in the instruction manual corresponding to the external antenna used, or
consult your installation company if required.
- In conjunction with the MyDigitRadio Pro app the device oers multi-room support (you can find more
information in the MyDigitRadio Pro app and on the website www.technisat.de)
- Spotify Connect support.
- Audio playback of USB, CD or UPnP.
4.3 Preparing the DIGITRADIO for operation
4.3.1 Connecting the power supply unit
> Connect the device to the mains network using the supplied power supply unit.
To supply power to the device, first of all connect the cable to the DigitRadio and then insert the power
supply unit into the socket.
When you connect to the mains for the first time, "TechniSat" appears on the display.
Ensure that the operating voltage of the radio coincides with the local mains voltage before you insert it
into the wall socket.
When not in use, remove the power supply unit from the power outlet. In doing so, pull on the plug and
not on the cable.
Remove the power supply unit before a storm.
Remove the power supply unit from the power outlet if the device is not going to be used for a prolonged
period, e.g. before going away on a long trip.
The heat generated during operation must be dissipated by sucient air circulation. Therefore the device
must not be covered or installed in a closed cupboard. Ensure there is free space of at least 10 cm around
the device.
BDA_DIGITRADIO_600_630.indd 22-23 22/06/2018 09:31
To Next Page
Loading...
Need help?
General