TechniSat DIGITRADIO Car 1 User Manual

29
E
5.1. Power supply
Plug in the cigaree holder (5) in the power supply socket in your car. Fix the DIGITRADIO Car 1 to the magnetic
connector of the cigaree holder.
1
Thanks for choosing ROB675245, a DAB/DAB+ receiver with Bluetooth. This device will help you listen to the
DAB/DAB+ radio, phone music or call from your car radio. To get the best experience, please read this manual
carefully.
Instrucon:
Package contents:
DAB Receiver controller
DAB Receiver antenna
Cigaree socket adapter
Dual USB Car charger
Magnet holder
3.5 mm audio cable
Micro USB cable
User manual
Fuse
DAB Receiver controller
Cigaree socket adapter
Dual USB Car charger
DAB Receiver antenna Magnet holder
Alternatively you can use the USB charger, included in delivery content. In this case, please plug in the USB
charger in the power supply socket in your car. Connect the other side of cable with the MIcro USB plug of
DIGITRADIO Car 1. (please see point 9, chapter 4) and use the magnetic holder (please see chapter 3) for fixing in
air vent of the car.
5. Installation

TechniSat DIGITRADIO Car 1 Specifications

General

DAB Radio frequency range	Band III 174- 240 MHz
FM Transmitet r frequency range	87.6 MHz- 107.9 MHz
Bluetooth Modul	ATS V 4.2, A2DP, HFP, AVRCP
Display	VA Display
Power supply	5 Volt 500mA
Micro SD cardreader	Micro SD Card up to 32 GB Fileformat: MP3
LINE IN/LINE Out	Stereo 3, 5 mm Klinke
Accu	800 mAh
Temperature	-20 C0 - + 70 C0

Weight and Dimensions

Dimension	49 X 76.5 X 30.79