TechniSat DIGITRADIO Car 1 User Manual

28
E
11. Line Out
This connector you can use to connect the DIGITRADIO to your car radio system via 3,5mm audio cable.
12. LINE IN
Connect your an external audio player with this plug.
13. ON/OFF
Hold this key pressd to turn on/turn o the device.
5. Installation
The DIGITRADIO Car 1 is an DAB+ radio receiver designed for upgrade your existing car radio system.
The device receives DAB+ radio stations to transmit them via cable or FM tansmier to you car radio unit.
You can also connect external media player devices via bluetooth or cable, in order to transmit music from these
devices to your car radio unit.
Furthermore, you can use the DIGITRADIOas hands free phone system, under Bluetooth connected condition.
4. Overview Controls

TechniSat DIGITRADIO Car 1 Specifications

General

DAB Radio frequency range	Band III 174- 240 MHz
FM Transmitet r frequency range	87.6 MHz- 107.9 MHz
Bluetooth Modul	ATS V 4.2, A2DP, HFP, AVRCP
Display	VA Display
Power supply	5 Volt 500mA
Micro SD cardreader	Micro SD Card up to 32 GB Fileformat: MP3
LINE IN/LINE Out	Stereo 3, 5 mm Klinke
Accu	800 mAh
Temperature	-20 C0 - + 70 C0

Weight and Dimensions

Dimension	49 X 76.5 X 30.79