TechniSat DIGITRADIO Car 1 User Manual

32
E
6.1. DAB reception
> Press the MODE buon possibly several times to enter the DAB mode.
> Hold the buon pressed. The device starts the DAB+ scan, and stores every received
radio station. Once the scan is completed, the device plays the first received radio station.
> You can switch to any stored radio station by using the rotaing the spin buon.
> Press the INFO/MENU buon, to get further information of the currend played radio station.
6.2. Bluetooth
You can transmit your music, stored on you mobile device via Bluetooth
> Press the MODE buon possibly several times until BT is shown in display.
The device starts the Bluetooth connection.
> Activate the Bluetooth connection seings on you mobile device and select the DIGITRADIO device as device
you want to connect.
> Once the connection is established, you can play the music files stored on you moble device.
6. Operation

TechniSat DIGITRADIO Car 1 Specifications

General

DAB Radio frequency range	Band III 174- 240 MHz
FM Transmitet r frequency range	87.6 MHz- 107.9 MHz
Bluetooth Modul	ATS V 4.2, A2DP, HFP, AVRCP
Display	VA Display
Power supply	5 Volt 500mA
Micro SD cardreader	Micro SD Card up to 32 GB Fileformat: MP3
LINE IN/LINE Out	Stereo 3, 5 mm Klinke
Accu	800 mAh
Temperature	-20 C0 - + 70 C0

Weight and Dimensions

Dimension	49 X 76.5 X 30.79