TechniSat HD-Vision 32 - Searching Manually for DVB-C Channels; Searching Manually for DVB-S Channels

EN
22
Name (Analogue CT and FM Radio)
> Use the up/down arrow buttons to mark the Name item.
> To change the program name press the yellow Change function
button.
> Use the arrow buttons to select the fi rst letter of the name and
confi rm with OK.
> Continue in the same way to complete the name.
> If you enter something incorrectly you can delete it using the red
function button.
> You can accept the new program name by pressing the yellow
function button.
Force mono Analogue CT and FM Radio
> Use the up/down arrow buttons to mark the Force mono
item.
> Use the right/left arrow buttons to switch the Force mono
function On or Off.
Save
> To save the settings press the green Accept function button.
> You can return to normal mode by pressing the Menu button.
8.3.2 Searching manually for DVB-S channels
> Open the Manual search menu as described in Section 8.3.
Satellite
> Use the up/down arrow buttons to mark the Satellite item.
> If you click on the OK button a screen opens displaying the
active satellites.
> Use the up/down arrow buttons to mark the desired satellite.
> Confi rm by pressing the OK button.
The selected satellite is displayed in the satellite line.
Frequency
> Use the up/down arrow buttons to mark the Frequency item.
> Use the numerical keypad to enter the frequency of the
transponder that you want to scan.
Symbol rate
> Use the up/down arrow buttons to mark the Symbol rate
item.
> Use the numerical keypad to enter the symbol rate.
Polarization
> Use the
up/down arrow buttons to mark the Polarization
item.
> Use the right/left arrow buttons to enter the polarization of the
transponder.
Start search
> To start the search, press the green Start search function
button.
Please take note of the on-screen information.
PID search
The PID search allows you to search for a particular digital program
using program-specifi c PID numbers.
> Press the yellow PID search function button to open the window
for entering the PID numbers.
> Use the numerical keypad to enter the PID numbers in the
respective line.
> Press the yellow OK function button to accept the PIDs.
> To start the search, press the green Start search function
button.
Please take note of the on-screen information. A query appears
on-screen after the search.
> To add the found channels to the list of favourites, mark the Yes
fi eld and press the OK button.
> You can return to normal mode by pressing the Menu button.
8.3.3 Searching manually for DVB-C channels
> Open the Manual search menu as described in Section 8.3.
Channel
> Use the up/down arrow buttons to mark the Channel item.
> Use the right/left arrow buttons or the numerical keypad to
set the desired channel.
Channel type
> Use the up/down arrow buttons to mark the Channel type
item.
> Use the right/left arrow buttons to set the channel type
(standard television channel C or special channel S).
Symbol rate
> Use the up/down arrow buttons to mark the Symbol rate
item.
> Use the numerical keypad to enter the symbol rate.
Modulation
> Use the
up/down arrow buttons to mark the Modulation
item.
> Use the right/left arrow buttons to enter the modulation of the
channel.
Start search
> To start the search, press the green Start search function
button.
Please take note of the on-screen information. A query appears
on screen after the search.
> To add the found channels to the list of favourites, mark the Yes
fi eld and press the OK button.
> You can return to normal mode by pressing the Menu button.