TechniSat TECHNIRADIO 6 IR - Page 124

124
10.5 Scan seings
In this menu item it is possible to set the sensitivity of the scan.
> Open the Main menu by pressing the MENU buon and use the SELECT knob
to select [Scan seings].
> Press the SELECT knob.
> Select whether the scan should only stop for stations with a strong signal
[YES] or for all stations (including stations with a weak signal) [NO].
With the NO seing, the scan stops automatically upon detecting each
available station. This can result in weak stations being played with
background noise.
> Then press the SELECT knob to save the seing.
10.6 Audio seings
> Open the Main menu by pressing the MENU buon and use the SELECT knob
to select [Audio seings].
> Press the SELECT knob.