Press the – button (36) to get to the temperature alarm mode.
Hold the – button down for 3 seconds. The maximum temperature display blinks. Press the + or –
button to set the values.
Press the MODE button (34) to confirm your setting. The minimum temperature display blinks. Press the + or –
button to set the values.
Press the MODE button to confirm your setting.
Activating / deactivating the the temperature and frost alarm
If more than one outdoor sensor is activated, press the CH button (37) to select one.
Press the – button (36) repeatedly to activate the temperature and frost alarms.
If the frost alarm alarm is activated, the corresponding symbol (23) appears next to the outdoor temperature. The
alarm signal sounds at –1 °C to + 3 °C.
If the temperature alarm is activated, the corresponding symbol appears next to the outdoor temperature. The alarm
signal sounds at the set values.
If the temperature and frost alarm are activated, both symbols appear in the display.
Background lighting
Press the SNOOZE /LIGHT button (33). The backlight illuminates for 5 seconds.
Battery state display
To Next Page
Loading...
Need help?
General
