Technoalarm TP4-20 - Activation;Deactivation of the Remote Controls

TP4-20 - User Manual Control by Telephone 6-3
6.1.3 ACTIVATION/DEACTIVATION OF THE REMOTE CONTROLS
To enter the remote control menu press:
+ 3
The following message is played:
Submenus
z Check status of remote controls
z Activation/deactivation of remote controls
CHECK STATUS OF THE REMOTE CONTROLS
To consult the status of the remote controls, enter the number of the remote control:
+ 1...2 Selection of the remote control (1 to 2)
The control panel plays the message relating to the current status of the remote control (active or in stand-by).
+ # to return to the main menu
ACTIVATION/DEACTIVATION OF THE REMOTE CONTROLS
To activate or deactivate the remote controls, enter the number of the remote control preceding it with the key * (star),
e.g.:
+ *1 Activation/deactivation remote control 1
+ *2 Activation/deactivation remote control 2
The control panel plays the message relating to the current status of the remote control (active or in stand-by).
+ # to return to the main menu
6.1.4 REMOTE DIGITAL VERIFICATION (RDV)
To enter the RDV menu press:
+ 4
The following message is played:
The RDV detectors are doppler detectors that permit the control of the protected zone through a sound wave
proportionate to the movement detected.
To consult the status of the RDV zones, enter the zone number, e.g.:
+ 1...20 Selection of the zone (1 to 20)
If the zone selected is not associated to any RDV detector, the control panel emits a vocal error message. If the zone
selected is an RDV zone, the control panel activates the remote digital verification of the doppler detector connected for
approximately 30 seconds.
+ # to return to the main menu
6.1.5 RECORDING OF THE TELEPHONE OPENING MESSAGE
The telephone opening message is played every time the control panel makes a phone call.
To enter the opening message menu press:
+ 5
The following message is played:
Submenus
z Recording of opening message
z Playing of opening message
RECORDING OF THE OPENING MESSAGE
The duration is fix. Therefore, it is recommended to record a message of a duration of approximately 10 seconds in
order to avoid silent periods during play-back.
Menu remote control - to return to menu press hash
Menu RDV - to return to menu press hash
Menu opening message - to return to menu press hash
Message relating to the status of the remote control
Message relating to the status of the remote control