TP4-20 - User Manual Index
1
INDEX
PREFACE
1. GENERAL FEATURES
1.1 ACCESS CODES 1-1
1.2 OPERATIONS EXECUTABLE BY CONSOLE 1-1
1.2.1 Operations executable with master code 1-1
1.2.2 Operations executable with standard user code 1-2
1.3 OPERATIONS EXECUTABLE BY TELEPHONE 1-2
1.3.1 Skip answering machine 1-3
1.4 FUNCTIONING 1-3
1.5 COMPOSITION 1-3
2. SIGNALING
2.1 CONSOLE LCD020 2-1
2.1.1 Program status LED (yellow) 2-1
2.1.2 Program alarm LED (red) 2-2
2.1.3 General control LED (yellow) 2-2
2.1.4 Tamper alarm LED (red) 2-2
2.1.5 Battery LED (red) 2-3
2.1.6 Mains LED (red) 2-3
2.1.7 General alarm LED (red) 2-4
2.1.8 Command mode LED (yellow) 2-4
2.1.9 Line LED (yellow) 2-4
2.1.10 Hold-up alarm 2-4
2.2 CONSOLE LCD012 2-5
2.2.1 Program status LED (yellow) 2-5
2.2.2 Zone alarm LED (red) 2-5
2.2.3 Tamper alarm LED (red) 2-6
2.2.4 Battery LED (red) 2-6
2.2.5 General alarm LED (red) 2-7
2.2.6 Key LED (red) 2-7
2.2.7 Mains LED (green) 2-8
2.3 CONSOLE LED06 2-8
2.3.1 Program status LED (yellow) 2-8
2.3.2 Zone alarm LED (red) 2-8
2.3.3 Tamper alarm LED (red) 2-9
2.3.4 Battery LED (red) 2-9
2.3.5 Key LED (red) 2-10
2.3.6 Mains LED (green) 2-10
2.4 ELECTRONIC KEYPAD TP SDN 2-10
2.4.1 LED 7 - OCG/General control 2-10
2.4.2 LED 6 - General alarm 2-11
2.4.3 LED 5 - Command mode 2-11
2.4.4 LED 1, 2, 3, 4 - Program status 2-11
2.5 KEY READER ATPK 2-11
2.5.1 LED 4 - OCG/General control 2-11
2.5.2 LED 1, 2, 3 - Program status 2-12
2.6 RESET OF LED SIGNALING 2-12
3. PROGRAMMING
3.1 MASTER MENU 3-1
3.1.1 Activation/deactivation of the remote controls 3-3
To Next Page
Loading...