Index User Manual - TP4-20
2
3.1.2 Clock setting 3-3
3.1.3 Activation of chime 3-3
3.1.4 Creation/modification of the programs 3-3
3.1.5 Parameterization of the timers and access periods 3-4
3.1.6 Parameterization of the telephone section 3-5
3.1.7 Programming of the codes 3-8
3.1.8 Programming of the keys 3-10
3.1.9 Programming of the wireless keys 3-11
3.1.10 Enabling of the consoles 3-13
3.1.11 Exclusion of modules 3-13
3.1.12 Functioning test 3-14
3.1.13 Control panel options 3-15
3.2 STANDARD USER MENU 3-16
3.2.1 Activation/deactivation of the remote controls 3-17
3.2.2 Clock setting 3-17
3.2.3 Parameterization of the telephone section 3-17
4. CONTROL BY CONSOLE
4.1 ARMING 4-4
4.1.1 Arming with master code 4-5
4.1.2 Arming with standard user code 4-7
4.1.3 Quick arming (if enabled) 4-7
4.1.4 Arming through key zone 4-7
4.1.5 Automatic arming 4-8
4.1.6 Arming during the access periods 4-8
4.1.7 Arming denied 4-8
4.2 DISARMING 4-9
4.2.1 Disarming with master code 4-9
4.2.2 Disarming with standard user code 4-9
4.2.3 Disarming under duress (if enabled) 4-9
4.2.4 Quick disarming (if enabled) 4-10
4.2.5 Disarming through key zone 4-10
4.2.6 Automatic disarming 4-10
4.2.7 Disarming under duress 4-10
4.3 BYPASS 4-11
4.3.1 Activation of bypass with code 4-11
4.3.2 Automatic activation of bypass 4-11
4.3.3 Activation of bypass during the access periods 4-11
4.3.4 Deactivation of bypass with code 4-11
4.3.5 Automatic deactivation of bypass 4-11
4.3.6 Deactivation of bypass on expiry of the maximum bypass time 4-12
4.4 RELEASE OF PANIC ALARM 4-12
4.5 RELEASE OF FALSE CODE ALARM 4-12
4.6 VIEWING OF ZONE STATUS 4-12
4.7 ABORT OF TELEPHONE CALLS 4-12
4.7.1 Manual abort of the telephone calls 4-12
4.8 RESET OF LED SIGNALING 4-13
4.9 CONSULTATION OF THE EVENT BUFFER 4-13
5. CONTROL BY KEYPOINT AND WIRELESS KEY
5.1 CONTROL BY KEY INTERFACE TP PK AND KEY READERS ATPK 5-1
5.1.1 Arming 5-1
5.1.2 Disarming 5-3
5.1.3 Bypass 5-4
5.1.4 Special operating conditions 5-4
5.2 CONTROL BY ELECTRONIC KEYPAD TP SDN 5-5
To Next Page
Loading...