Why does my Technoblock SVN0050 Refrigerator compressor keep stopping?
If the Technoblock Refrigerator compressor stops, it could be due to insufficient room ventilation, an anomaly in the mains voltage, or a faulty condenser fan. The device will automatically reset in these cases.
What to do if ice forms on the evaporator in my Technoblock Refrigerator?
If ice is forming on the evaporator of your Technoblock Refrigerator, preventing regular airflow, it could be due to: * The door being opened too frequently. * A faulty evaporator fan. * A faulty solenoid valve (in models with hot gas defrost). * A faulty defrost heater (in models with electric defrost). * A faulty defrost process. To address this, increase the defrost termination temperature by a few degrees and increase the number of defrosts.
Why is the high temperature alarm going off on my Technoblock SVN0050 Refrigerator?
A high temperature alarm in your Technoblock Refrigerator can be triggered by excessive door openings, products stored at too high a temperature, or a malfunction of the unit.
How to fix open door alarm on Technoblock SVN0050?
The open door alarm on your Technoblock Refrigerator activates when the door opening time exceeds the maximum time set by the parameter. The alarm will automatically reset when the door is closed.
What to do if Technoblock SVN0050 does not start when pressing ON/OFF key?
If your Technoblock Refrigerator isn't starting when you press the ON/OFF key (but the display is on), check the microdoor connection. Ensure the switch contact is closed when the door is closed.
Why does the display not light up on my Technoblock SVN0050?
If the display on your Technoblock Refrigerator does not light up, check if there is power to the unit, if the mains cable is properly connected, and the fuses inside the electric panel.
General| Brand | Technoblock |
|---|---|
| Model | SVN0050 |
| Category | Refrigerator |
| Language | English |
To Next Page