Easy Lamp: Quick Service & maintenance manual – rev. 1.0
Page 3.3
3.4. REMOTE CONTROL
It’s an infrared diode transmitter remote control with 5 buttons:
• switch on/off red button
• Four program buttons, named from 1 to 4.
It contains a Lithium 3V battery (type CR2025), to keep it powered.
3.5. POWER SUPPY
It’s a 14,4Vdc (15W – 1,04A) power supply unit, used to re-charge battery and switch on the
Easy Lamp the first time (or when battery are replaced, disconnected or fully empty).
It has a diode in the red cable to stop possible current back from battery.
Diode
To Next Page
Loading...