Easy Lamp: Service & maintenance manual – rev. 1.0\
Page 4.2
Check the battery voltage. Is it
lower than 12Vdc?
THE EASY LAMP
DOES NOT
ILLUMINATE
Check if Easy Lamp switch on
by remote control (with the
Power Supply connected).
NO
YES
3
NO
Low battery . Re-charge at least
ev ery 30 hours of lamp running
time.
SI
Re-charge battery f or at least
14 hours. Does it work af ter
that time?
NO
Connect the Power Supply and
check if a red f lash appear.
NO
YES
Check if the main power reach
the electronic board at
terminals P1 and P2.
Replace the electronic
board.
YES
A
2
1
NO
Check battery wiring, f use and
faston contacts. If it's ok try to
replace the battery : probably it
cannot prov ide correct amps ev en
if voltage is correct.
YES
YES
Replace the battery .
4
B
To Next Page
Loading...