Technogym element leg curl - Cable Replacement Guide

25Leg Curl
A
C
B
04194024
Replacing the cable
To replace the cable, proceed as follows:
- remove the back panel of the weight
stack (following the instructions
found in the section Removing the
weight stack panel);
- unscrew the screws (A), back off the
lock nut (B) and unscrew the
adjuster (C);
- extract the weight stack cable from
the adjuster side;
cont.
Identification of the manufacturer
and the equipment
Description of the equipment
Technical data
Safety labels and devices
Packing
Place of installation
Unpacking
Lifting and handling
the equipment
Adjusting the equipment
Routine maintenance
Replacing
the padded components
Replacing the cable
Adjusting cable tension
Removing
the weight stack panel
Technical Service
Storage
Disposing of the equipment
Using the equipment
Contents