EasyManua.ls Logo

Technogym EXCITE - User Manual

Technogym EXCITE
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EXCITE/EXCITE+
LINE
INSTALLATION MANUAL UNITY
3.0
ASSEMBLY KIT VISIO/VISIOWEB -
UNITY 3.0
Question and Answer IconNeed help?

Do you have a question about the Technogym EXCITE and is the answer not in the manual?

Summary

General Warnings and Advice

Introduction to Installation Manual

Provides an overview of the manual's purpose and target audience for technical personnel.

Useful Advice for Technical Assistance

Offers guidance on planning and executing technical assistance tasks effectively.

General Regulations for Service Work

Outlines essential rules and procedures to follow during service operations.

Personal Protective Equipment (PPE) Requirements

Details the necessary personal protective equipment for service personnel.

Assembly Kit Usage and Correspondence

Assembly Kit Code and Equipment Correspondence

Lists the mapping between assembly kit codes and compatible equipment models.

Passive Equipment: UNITY 3.0 Installation Instructions

Disassembling the Display Unit

Step-by-step guide on how to safely remove the display from the equipment.

Assembling the Rear Guard Cap

Instructions for correctly reattaching the rear guard cap to the display assembly.

Connecting Cables to the Display CPU Board

Detailed procedure for connecting various cables to the display's CPU board.

Reassembling the Display Unit

Steps to re-install the display unit after modifications or repairs.

Low Kit Replacement Procedure

Guidance on how to replace the Low Kit component.

Unity 3.0 Software and Low Kit Firmware Update

Instructions for updating the Unity 3.0 software and Low Kit firmware.

Unity 3.0 Configuration Settings

Procedures and details for configuring the Unity 3.0 system.

Run Now; Jog Now: UNITY 3.0 Installation

Disassembling the Upper Guard

Steps to remove the upper guard of the low kit for installation access.

Display Unit Disassembly

Procedure for removing the display unit from the equipment.

Connecting Low Kit Cables

Instructions for correctly connecting the cables associated with the low kit.

Disassembling the Extra Power Supply

Steps to remove the additional power supply unit from the equipment.

Disassembling the Cardio Receiver

Procedure for removing the heart rate receiver (chest belt/hand sensor).

Replacing the High Kit-Low Kit Cable

Guide on how to replace the connection cable between the high and low kits.

Connecting Various Cables

Detailed instructions for connecting multiple cables to the system components.

Reassembling the Display Unit (Run;Jog)

Steps for re-installing the display unit after modifications.

Reassembling the Cardio Receiver

Procedure for correctly re-installing the heart rate receiver.

Reassembling the Upper Guard

Steps to reattach the upper guard of the low kit.

Unity 3.0 Software Update

Instructions for updating the Unity 3.0 software on the equipment.

Unity 3.0 Configuration

Guidance on configuring the Unity 3.0 system after installation.

Technogym EXCITE Specifications

General IconGeneral
DimensionsVaries by model
WeightVaries by model
BrandTechnogym
LineExcite
TypeTreadmill
ConsoleLCD display
CategoryCommercial
DisplayLCD
ProgramsMultiple preset programs
Heart Rate MonitoringYes (hand grip, wireless chest strap optional)
Power SupplyMains Powered

Related product manuals