Technogym EXCITE - Replacing the High Kit-Low Kit Cable

EXCITE/EXCITE+ LINE - ASSEMBLY KIT VISIO/VISIOWEB-UNITY3.0
Installation Manual UNITY 3.0- Rev. 1.0
e-mail: support@technogym.com
Pag. 26
6. Remove the yellow connector (L) from the
cardio receiver.
4.6 REPLACEMENT OF THE HIGH KIT-LOW KIT CONNECTION CABLE
1. Remove the external guard of the lateral
right handlebar.
2. Remove the cable tie (M), that blocks the
High Kit - Low Kit connection cable.