1.2 USEFUL ADVICE
Technogym advises you to plan your technical assistance task in the following way:
Carefully assess the impressions reported by the Customer regarding the equipment’s operating
faults and ask questions suitable to clarify the signs of the defect.
Clearly diagnose the causes of the problem. This manual provides the fundamental theoretical ba-
sis, which must then be integrated by personal experience and aendance at the training courses
periodically oered by Technogym.
Plan the repair work in a rational manner so as to avoid wasting any time, e.g. collecting spare-
parts, preparing tools and equipment etc.
Access the component to be repaired, avoiding any unnecessary operations.
1.3 GENERAL REGULATIONS REGARDING SERVICE WORK
1. Check the serial number of the equipment, comparing it with the one on the work order.
2. Always mark any parts or positions which may be confused with each other at the time of
reassembly.
3. Use original Technogym spare parts and lubricants of the recommended brands.
4. Use special tools where specied.
5. Consult the Technical Newsleers and News Flashes, which may contain more up-to-date
information on adjustments and maintenance than those contained in this manual.
6. Before starting the repair procedure, make sure that the recommended tools are available and
in good condition.
7. Use only the tools indicated in the following procedures.
ATTENTION: it is the responsibility of the technician delimit the areas of intervention
and safe operation.
1.3.1 PERSONAL PROTECTIVE EQUIPMENT
For details, refer to the Health&Safety After Sales procedure, available on TG Direct.
EXCITE/EXCITE+ LINE - ASSEMBLY KIT VISIO/VISIOWEB-UNITY3.0
Installation Manual UNITY 3.0- Rev. 1.0
e-mail: support@technogym.com
Pag. 8
To Next Page
Loading...
