19
GHIL
GHIL
Multi Hip
Contents
Assembling the equipment
To assemble the handgrips:
- remove the packing materials which secure the handgrips onto the equipment; if using
cutters, scissors or similar tools, be very careful not to damage the rubber surface of the
handgrips or the equipment;
- lock down the two handgrips (G) into their threaded seats (I), turning in a clockwise
direction;
- when the plastic bushing (H) is correctly positioned between the rubber end piece and
the thread, use a 4-mm “T” wrench to lock down the dowels (L) on the lower part of the
threaded seats (I), in a clockwise direction.
Identification of the manufacturer
and equipment
Description of the equipment
Technical data
Accessories
Assembling the number holder
Safety labels and devices
Packing
Place of installation
Unpacking
Lifting and handling the
equipment
Adjusting the equipment
Assembling the equipment
Routine maintenance
Replacing the padded
components
Replacing the cable
Adjusting cable tension
Technical Service
Codes for original spare parts
Storage
Disposing of the equipment
Using the equipment
To Next Page
Loading...
