Main Screen Sub-Screen Description
Camera Setup
Paring
This system comes with cameras already paired.
Use Pairing to assign these cameras to different
channels or to pair additional new cameras to the
monitor.
ON/OFF Makes the cameras visible to the monitor.
Resolution Adjusts the video quality of each camera.
Recording
Setup
Duration
Set the length of time the camera records once
motion sensitivity triggers the camera to record.
The options are 15 seconds (Default), 30 seconds, or
1 minute.
Scheduled
Recording
Set up a schedule for pre-determined recording
times and lengths.
File Overwrite
Overwrites the oldest recorded data on the SD card
once the card is full.
System Settings
Date & Time
•Time Setting: Set the current time (including
daylight savings Time).
•Time Zone: Set the time zone for your system.
Time Zone
•Set the time zone for your system.
•Enable/Disable Daylight Savings Time.
Language
Changes languages setting for the monitor (English,
French or Spanish)
Default Settings Restores the system to default settings.
Format SD Card Reformats the SD card and deletes all existing data.
Information
Displays the current firmware information for the
monitor and each camera.
Motion
Detection
Settings
A single screen lets you set motion detection sensitivity for each
camera.
It also lets you determine which viewing areas for each camera should
be masked from motion detection.
Network
Settings
Advanced
Setup
Set up Dynamic or Static IP address.
Reset Password Reset the app password to the default (000000).
Information
Displays and allows you to change the network
information and the monitor’s unique UID number.
Firmware
Upgrade
Let’s you select to upgrade your firmware if necessary (from SD card or
the internet).
To Next Page
Loading...
