TECHWOOD DDR 94 User Manual

Delay Time
21
Delay Time
The delay time can be individually set for the Dolby
Digital/Dolby Pro Logic modes using the DELAY TIME
(CENTER/REAR) buttons.
When you adjust the delay time in the Dolby Digital mode, an
additional 15 ms is automatically added to the surround
channels in the Dolby Pro Logic mode. The current setting is
shown on the display.
Delay Time Setting
Adjustable Range
DOLBY DIGITAL Mode:
0 ~ 15 ms in 1 ms step (S-Delay)
0 ~ 5 ms in 1 ms step (C-Delay)
DOLBY PRO LOGIC Mode:
15 ~ 30 ms in 1 ms step (S-Delay)
In the surround modes, the sound from the rear speakers
should be delayed slightly, relative to that from the front
speakers.
The optimum delay time will depend on acoustic properties,
whether the walls and furnishings reflect or absorb sound, etc.
It is recommended that you try different delay times to obtain
the best effect. The delay is digitally synthesized, for the
highest sound quality with minimum noise and distortion.
The delay time can be set independently for each surround
mode using the DELAY TIME buttons, with the current setting
shown in the display.

TECHWOOD DDR 94 Specifications

General

Brand	TECHWOOD
Model	DDR 94
Category	Receiver
Language	English