Attention
1. Any attempt to disassemble, adjust or repair the mouse may result
in exposure and other safety hazards.
2. If not used, the mouse will drop into auto-sleeping mode within 3
seconds, press any key or scroll wheel to activate the mouse.
3. Do not use the mouse on a glass or mirrored surface, as these surfaces
will cause the mouse to fail temporarily.
4. The mouse might not work smoothly on some special surfaces, such
as smooth, dark or black, reflecting and 3D mouse pads surfaces.
5. Please avoid using the mouse on a metal surface. Metals, such as iron,
aluminium or copper, shield the radio frequency transmission and may
slow down the mouse presenter’s response time or cause the mouse to
fail temporarily.
IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW
THESE INSTRUCTIONS.
1.SAVE THESE INSTRUCTIONS - This sheet contains important safety
and operating instructions.
2.Before using the product, read all instructions and caution markings on
the product, accessories and device using our product.
3.This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
4.Children should be supervised to ensure that they do not play with
the appliance.
5.Keep the product away from fire or explosion may occur.
6.For indoor use only. Do not expose to rain, water, excess moisture or snow. 7.Do
not place product in or near inflammable, explosive or hazardous object. 8.Do not
place in or near water, rain, excess moisture or extreme heat.
9.Do not operate product with damaged cord or plug.
10.Do not operate product if it has been damaged in any way.
11.Do not disassemble the product. Disassembly may result in a risk of
safety hazards.
12.Do not throw or shake the product
13.To reduce the risk of electric shock, unplug the product from the
power supply when not in use or switch off the power supply
21
To Next Page
Loading...
