13
Multi Windows
Multi-Window allows you to open apps in split screens for easy multitasking.
Enable Split-screen Mode:
1. Open an app and touch Background to enter background. Touch the app icon to
enter Split-screen mode. Then, touch Split-screen.
2. Touch and hold an app and touch another app to enable Split-screen mode.
Exit Split-screen mode:
Drag in the middle of the split screen line until either pane disappears.
Some apps don’t support Split-screen mode.
Projection Connection
Wireless Connection
The supported protocols and the projection methods vary between different large
displays. Please select the projection method based on protocol. Refer to the large
display user guide or consult the manufacturer for the supported protocol.
Large displays supporting Miracast
1. Ensure that the Miracast switch or the Projection switch is enabled on the large
display. Refer to the large display user guide or consult the manufacturer for the
enabling mode.
2. Swipe down from the top of the screen to exit Control Center and light up .
3. Go to the shortcut switch bar on the Control Center screen (depending on your
model), and touch Project to allow your table to search for large displays. You can
also go to Settings > Connected Devices > Connection Preferences, and touch
Project.
4. After search is complete, touch the corresponding large display name in the
device list, and project your tablet screen to the large display. After projection,
swipe down from the top of the screen to exit Notification Center. Touch
Disconnect to exit the Wi-Fi Projection.
Large displays supporting DLNA
1. Before use, please connect your tablet and the large display to the same WLAN
network.
2. Ensure that the DLNA switch, or the Projection switch is enabled on the large
display. Refer to the large display user guide or consult the manufacturer for the
enabling mode.
3. Go to media apps such as gallery, video, and music on your tablet, open the
content to be projected, and find the entry for projection.
To Next Page
Loading...