18
USB OTG function
This device supports USB OTG function to exchange data with other portable devices
(flash drive, mobile hard disk, mouse, and keyboard).
1. Devices need to be connected to this device via an OTG cable.
2. Please keep battery above 50% while using OTG function. A separate power
supply is needed for high-power consumption devices.
Charger Specifications
• Charger specs should match input voltage/current shown on the back of the
product.
• Please only use chargers that meets the above specification.
• Please do a fully recharge every 3 months if the product is going to stay unused
for and extended period.
• For first use after storage, the product may require a 30-minute charging session
before charging status in indicated.
Firmware Download
Select and download and official website firmware.
Enter a product ID number on the Download screen to find the desired firmware, such
as G1F1:
To Next Page