TecMate Optimate4 User Manual

MODEL : TM637 / TM639 / TM647 / TM649
AC : 100 – 240V 50-60Hz
0.36A @ 100Vac / 0.19A @ 240Vac
DC : 12V 1.25A
INSTRUCTIONS FOR USE
IMPORTANT: Read completely
before charging
1 x 12.8V
LiFePO
4
1.25 - 15Ah (max. Ah based on
12 hour charge).
1 x 12V
STD / AGM-MF / GEL
4 - 60Ah (max. Ah based on 48
hour charge).
+ -
Pb
+ -
LFP
Automatic charger for 12V lead-acid & 12.8V LiFePO
4
batteries • 12鉛蓄電池および12.8V LiFePO4バッ
テリー用自動充電器 • 12V 鉛酸和 12.8V LiFePO4 電池的自動充電器 • 12V 납산 및 12.8V LiFePO4
배터리용 자동 충전기
사용 설명서
중요: 제품을 사용하기 전에 설
명서를 읽어주세요
copyright © 2023 TecMate International – TM637-639-647-649-IN1-230424
重要使用說明
請充電前完整閱讀
取扱説明書
重要：充電器をご使用になる前に本
書を必ず最後までお読みください。
quad program

TecMate Optimate4 Specifications

General

Output Voltage	12V
Input Voltage	100-240V AC
Charging Current	0.8A
Battery Types Supported	AGM, GEL
Protection Features	Reverse polarity protection

Summary

Mounting Notice

Important Safety Instructions - Section A

General Battery Charger Precautions

General safety rules for using the charger, including handling and maintenance.

Risk of Explosive Gases

Warnings about explosive gases generated by batteries during operation.

Personal Precautions

Important Safety Instructions - Section A (Continued)

Charging When Battery is Outside Vehicle

Procedure for charging a battery that has been removed from a vehicle.

DC Connection Precautions

Safety measures and procedures for connecting DC output clips.

Preparing the Battery

Charging When Battery is Installed in Vehicle

Procedure for charging a battery that remains installed in a vehicle.

Proceeding to Charge

Program Selection

Proceeding to Charge (Continued)

Steps 4 & 5: Save

Step 9: Maintenance Charge

Step 6: Charge

Troubleshooting Guide

Common issues and solutions for charging problems.

Step 8: Test After Charge