To Next PageTo Next Page
Need help?Do you have a question about the TecMate Optimate 3+ and is the answer not in the manual?
General| Brand | TecMate |
|---|---|
| Model | Optimate 3+ |
| Category | Battery Charger |
| Language | English |
Confirms AC power supply to the charger.
Indicates wrong output connections, requires swapping.
Confirms circuit activation for battery recovery, remains steady for neglected batteries.
Indicates bulk charge stage and charge level verification.
Flashes for a good battery during the 30-minute voltage retention test.
Indicates battery voltage below 12.4V during the test, signifying an issue.
Covers explosive gases, acid handling, protective gear, and lead-acid battery safety.
Discusses resistance to spilled liquids and light rainfall, advises against prolonged exposure.
Details using crocodile clamps or eyelets for connection, including protective caps and fuses.
Includes advice on charging car batteries, deep-discharged batteries, and connecting to vehicle systems.
How to connect the charger to the battery and mains supply.
Details activation for batteries, including deep-discharged and neglected ones.
Explains bulk charge, absorption, and verification stages using LED indicators.
Describes alternating 30-minute test and maintenance periods for battery health.
