To Next PageTo Next Page
Need help?Do you have a question about the TecMate Optimate lithium TM290 and is the answer not in the manual?
General| Input Voltage | 100-240V AC |
|---|---|
| Frequency | 50/60Hz |
| Charging Current | 0.8A |
| Battery Capacity Range | 2-30Ah |
| Case | Plastic |
| Output cable length | 1.5 m |
| Charge Voltage | 14.4V |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
| Protection Features | Reverse polarity, short-circuit protection |
| Included accessories | Ring terminals |
| Charging Modes | Multi-stage charging, including qualification, bulk charge, absorption, optimization, and maintenance |
Steps for voltage start, pre-charge test, and temperature check.
Modes for saving low voltage and testing cell damage.
Stages for charging, optimizing, testing, and maintenance.
Explains LED indicators for program and test modes.
Steps to reset the Battery Management System.
Basic safety rules, product use, and general warnings.
Warnings on explosive gases and personal protection.
Procedures and checks before initiating charging.
Guidelines for charger placement and DC clip connection.
Step-by-step guides for connecting batteries in/out of vehicles.
Proper operation, liquid exposure, and battery care.
Detailed steps for connecting and initiating the charge.
BMS reset and initial program stages (voltage, test, temperature).
Stages for saving low voltage and testing cell damage.
Stages for charging, optimizing, testing, and maintenance.
Keeping battery charged and energy saving.
Details of the limited warranty and regional coverage.
Compliance, physical, and electrical characteristics.
Manufacturer, design copyright and website.
