To Next PageTo Next Page
Need help?Do you have a question about the TecMate OptiMate Lithium 4s 0.8A and is the answer not in the manual?
General| Input Voltage | 100-240V AC |
|---|---|
| Frequency | 50/60 Hz |
| Output Current | 0.8A |
| Battery Voltage | 12V |
| Battery Type | Lithium (LiFePO4, Li-ion) |
| Battery Size | Up to 30Ah |
| LED Indicators | Yes |
| Protection Features | Reverse polarity, Short-circuit, Over-temperature |
| Charger Type | Smart Battery Charger |
| Charging Stages | 4-stage (Initialization, Bulk, Absorption, Maintenance) |
Essential instructions to read before commencing charging the battery.
Includes warnings about appliance class, indoor use, attachments, cord handling, and service.
Highlights dangers of explosive gases from batteries and the importance of following instructions.
Advises on personal safety measures when working near batteries, including eye protection and avoiding sparks.
Steps and precautions for preparing the battery and environment before charging.
Guidance on charger placement, DC connection precautions, and cable management.
Step-by-step instructions and safety warnings for connecting the charger to a battery installed in a vehicle.
Step-by-step instructions and safety warnings for connecting the charger to a battery removed from a vehicle.
Explanation of the status indicated by LED #1, LED #2, and LED #3 during the charging process.
Instructions for resetting the Battery Management System (BMS) and troubleshooting issues.
Information on error states like LED #6 flashing and cautions regarding deep discharged batteries.
Details on CHARGE, PULSE ABSORPTION, and CHARGE VERIFICATION steps.
Information on LED #5 (ready) and LED #6 (depleted/poor health) for 24-7 maintenance.
Details on safety and EMC certifications, and energy efficiency ratings.
Information on IP rating, operating range, weight, size, cable length, and mounting.
Details on input voltage, output range, protection, and electrical design.
