TecMate Optimate lithium TM291 - User Manual

PT
CZ
Automatic charger for 12.8V LiFePO
4
batteries
Chargeur automatique pour batteries 12.8V LiFePO
4
Cargador automático para baterías 12.8V LiFePO
4
Automatische Ladegerät für 12.8V LiFePO
4
Batterien
Automatische lader voor 12.8V LiFePO
4
accu’s
Caricabatterie automatico per batterie 12.8V LiFePO
4
Carregador automático para baterias de 12.8V LiFePO
4
Automatisk diagnostisk laddare för 12.8V LiFePO
4
-
batterier
Automatická diagnostická nabíječka pro 12,8v baterie
LiFePO
4
MODEL: TM290 (EU), TM291 (US), TM294 (UK),
TM298 (AU)
AC: 100 – 240V 50-60Hz
0.85A @ 240V / 1.5A @ 100V
DC: 60W ¨ 12V 5A
Thermally adjusted
INSTRUCTIONS FOR USE
IMPORTANT: Read completely
before charging
MODE D’EMPLOI
IMPORTANT: à lire avant
d’utiliser l’appareil
MODO DE EMPLEO
IMPORTANTE: a leer antes
de utilizar el aparato
ANWENDUNGSVORSCHRIFTEN
WICHTIG: Vollständig vor der
Benutzung lesen
GEBRUIKSAANWIJZING
BELANGRIJK: Lees volledig
voor gebruik
ISTRUZIONI PER L’USO
IMPORTANTE: da leggere prima
di utilizzare l’apparecchio
INSTRUKTIONER VIKTIGT: läs
följande fullständiga instruk-
tioner för användningen innan
du använder laddaren
INSTRUÇÕES DE UTILIZAÇÃO
IMPORTANTE: Ler antes de
utilizar.
INSTRUKCE PRO POUŽIT.
DŮLEŽIT: Přečtěte si pozorně
před použit.m
Save Charge Maintain Test
Save Charge Maintain Test
1 x 12.8V (4 x 3.2V cells) LiFePO
4
Lithium Iron Phosphate
2.5 - 100Ah (charge within 24 hours)
+-
10 STEPS
TM29x-IN1-170306
copyright @ 2017 TecMate International
10
OptiMate
maintenance
9
TEST after
CHARGE
1
Low Volt
Start (0.5V)
2
TEST before
charge
3
Temperature
check
4
Ultra LOW
VOLT SAVE
5
LOW VOLT
SAVE /
cellmonitoring
6
TEST -
cell damage
7
Cell-balancing
CHARGE
8
OPTIMIZE
0.5V
13.6V
14.4V
SE
4&5.SAVE 6.TEST 7.CHARGE 8.OPTIMIZE 9.TEST 10. MAINTAIN
1.START 2.TEST 3.TEMP
24-7-365
°C/°F
40
-20
0
104
32
-4

TecMate Optimate lithium TM291 Specifications

General

Type	Battery Charger
Model	OptiMate Lithium TM291
Input Voltage	100-240VAC
Frequency	50/60Hz
Charging Current	2A
Charge Amperage (A)	2A
Compatibility	Lithium-ion (LiFePO4) batteries
Weight	0.5 kg
Protection Features	Short circuit, reverse polarity, overcharge

Summary

Product Overview and Instructions

10 Steps Charging Program

Details the 10-step charging program sequence for the battery charger.

LED Panel and Program Indicators

Program Sequence LEDs

BMS Reset Procedure

Illustrates the procedure for resetting the Battery Management System (BMS) of the battery.

Safety Instructions for Canada & USA

General Safety Precautions

Explosive Gas Warnings

Warns about the danger of explosive gases generated by lead-acid batteries during charging.

Personal Safety Precautions

Details personal safety measures, including eye protection and handling battery acid.

Advanced Safety and Connection Procedures

Charger Location and DC Connection

Connecting Battery Inside Vehicle

Step-by-step instructions for connecting the charger to a battery installed inside a vehicle safely.

Connecting Battery Outside Vehicle

Step-by-step instructions for connecting the charger to a battery removed from a vehicle.

Usage Guidelines and Charging Process

General Usage and Safety Notes

Handling Deeply Discharged Batteries

Provides specific advice for handling and charging LiFePO4 batteries that are deeply discharged.

Connecting Charger to Battery

Details the correct procedure for connecting the charger to the battery terminals, including sequence.

Detailed Charging Program Steps

BMS Reset and Initial Voltage Check

Describes the BMS reset process and the initial battery voltage check for program activation.

Pre-Charge Testing and Temperature Check

Low Voltage Save Modes

Cell Damage Test

Advanced Charging and Test Results

Charge and Optimize Modes

Post-Charge Testing and Maintenance

Interpreting Test Results

Provides guidance on interpreting test results, identifying potential battery problems, and error indicators.