To Next PageTo Next Page
Need help?Do you have a question about the TecMate Optimate TM500 and is the answer not in the manual?
General| Output Voltage | 12V |
|---|---|
| Weight | 0.5 kg |
| Input Voltage | 100-240V AC |
| Battery Types Supported | AGM, GEL |
| Typical Charge Time | Varies by battery size |
| Maintain | Yes, with maintenance mode |
| Charge Control | Multi-stage automatic |
Mandatory step to read all provided instructions before commencing any charging operation.
Safety warnings concerning explosive gases emitted by batteries and precautions to take.
User safety guidelines for handling batteries, including protective gear and acid contact procedures.
Steps to prepare the battery and environment before initiating the charging process.
Guidelines for safe and effective placement of the charger.
Essential precautions to observe when connecting and disconnecting DC power clips.
Procedure for connecting the charger to a battery that is installed within a vehicle.
Procedure for connecting the charger to a battery that has been removed from the vehicle.
Description of connection sets, including clips and eyelet lugs for the charger.
Detailed instructions for connecting the charger to the battery, including sequence and polarity.
Specifications for the source battery or DC supply needed to power the charger.
Information on compatible battery types (12V AGM, GEL, STD, LiFePO4).
Explanation of the meaning and function of each LED indicator on the charger.
Description of low volt save and pulse recovery stages for deeply discharged batteries.
Details on bulk charge, optimization, and pulsed absorption stages for battery charging.
Explanation of the 24-7 maintenance program, monitor mode, and maintenance charge cycles.
Indicates when a battery voltage is not sustained or irrecoverable, requiring immediate attention.
Guidelines and specifications for mounting the charger unit to a surface.
