EasyManua.ls Logo

TecMate Optimate 7 Select TM250 User Manual

TecMate Optimate 7 Select TM250
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RU
Automatic charger for 12V lead-acid batteries • Chargeur automatique pour
batteries 12V plomb-acide • Cargador automático para baterías 12V
plomo-ácido • Carregador automático para baterias de 12V chumbo-ácido •
Automatische Ladegerät für 12V Blei-Säure Batterien • Automatische lader
voor 12V loodzuur accu’s • Caricabatterie automatico per batterie 12V
piombo-acido • Automatisk diagnostisk laddare för 12V blybatterier
1 x 12V
STD / AGM-MF / GEL
3 - 400Ah (max. Ah rating
based on 48 hour charge).
+-
MODEL: TM250 / TM251 / TM252 / TM258
AC: 100 – 240V 50-60Hz
0.66A @ 240V / 1.59A @ 100V
DC: 120W ¨ 12V 10A
Thermally adjusted
INSTRUCTIONS FOR USE
IMPORTANT: Read completely
before charging
MODE D’EMPLOI
IMPORTANT: à lire avant
d’utiliser l’appareil
MODO DE EMPLEO
IMPORTANTE: a leer antes de
utilizar el aparato
ANWENDUNGSVORSCHRIFTEN
WICHTIG: Vollständig vor der
Benutzung lesen
GEBRUIKSAANWIJZING
BELANGRIJK: Lees volledig voor
gebruik
INSTRUÇÕES DE UTILIZAÇÃO
IMPORTANTE: Ler antes de
utilizar.
ISTRUZIONI PER L’USO
IMPORTANTE: da leggere prima
di utilizzare l’apparecchio
INSTRUKTIONER
VIKTIGT: läs följande fullständiga
instruktioner för användningen
innan du använder laddaren
ИНСТРУКЦИЯ ПО
ЭКСПЛУАТАЦИИ
ВАЖНО: Прочти полностью
перед использованием
Автоматическое зарядное устройство для 12В свинцово-
кислотных ккумуляторных батарей
copyright © 2019 TecMate International
TM250_251_252_258-IN1-190920
Question and Answer IconNeed help?

Do you have a question about the TecMate Optimate 7 Select TM250 and is the answer not in the manual?

TecMate Optimate 7 Select TM250 Specifications

General IconGeneral
BrandTecMate
ModelOptimate 7 Select TM250
CategoryBattery Charger
LanguageEnglish

Summary

Important Safety Instructions for Canada & USA

General Safety Precautions

Essential safety warnings and guidelines for charger operation.

Charging Process and Modes

STEP 1: Mode Selection

Selecting correct charging voltage and mode.

STEP 2: Protection and Fault Handling

Charger's response to low voltage or incorrect connection.

STEPS 4 & 5: Recovery Modes

Battery recovery for low charge or sulphation.

STEP 6: Charge Mode

Main charging stage for batteries with 50%-75% charge.

STEP 7: Optimize Mode

Pulsed absorption/final charge for 75%-100% state.

Test Results and System Information

Related product manuals