To Next PageTo Next Page
Need help?Do you have a question about the TecMate Optimate 7 Select and is the answer not in the manual?
General| Output Voltage | 12V |
|---|---|
| IP Rating | IP54 |
| Input Voltage | 100-240V AC |
| Charge Voltage | 14.4V / 14.7V |
| Battery Types Supported | Lead-acid, Lithium |
| Protection Features | Short circuit, over current, over temperature, reverse polarity |
Warns about explosive gases near lead-acid batteries and necessary precautions.
Outlines essential personal protective measures when working with batteries.
Explains the purpose of various LEDs and the select button for mode selection.
Describes how test LEDs indicate battery state of charge and health.
Details the correct procedure for connecting the charger to the battery safely.
Covers charging time, voltage selection, and power supply mode functions.
Explains how to select the desired charging mode using the SELECT button.
Describes low voltage start and power supply features during operation.
Details the battery test performed before charging using test LEDs.
Explains the Turbo Save mode for recovering deeply discharged batteries.
Describes the Pulse Save mode for preparing batteries for normal charging.
Details the main charging process with ampmatic controlled charge.
Explains the Optimize mode for equalizing cells and fine-tuning charge.
Outlines the test performed after charging to check charge retention.
Describes the Smart Maintain mode for long-term battery care.
Provides specific guidance for recovering severely discharged or neglected batteries.
Offers guidance on understanding the battery test results indicated by LEDs.
Details how to maintain batteries in good condition over long periods.
Explains the energy-saving feature of the charger when not connected to a battery.
Outlines the terms and conditions of the manufacturer's limited warranty.
Provides warranty specifics for North America and surrounding regions.
