TecMate OptiMate Lithium 8s 5A User Manual

Automatic charger for 25.6V LiFePO
4
batteries : Chargeur automatique
pour batteries 25.6V LiFePO
4
: Cargador automático para baterías
25.6V LiFePO
4
: Carregador automático para baterias de 25.6V LiFePO
4
:
Automatisches Ladegerät für 25.6V LiFePO
4
Batterien : Automatische lader
voor 25.6V LiFePO
4
accu’s : Caricabatterie automatico per batterie 25.6V
LiFePO
4
: Automatisk diagnostisk laddare för 25.6V LiFePO
4
-batterier
MODEL: TM280 / TM281 / TM282 / TM288
AC: 100 – 240VAC 50-60Hz
0.66A @ 240VAC 1.59A @ 100VAC
DC: 120W ¨25.6V 5A
Thermally adjusted
INSTRUCTIONS FOR USE
IMPORTANT: Read completely
before charging
MODE D’EMPLOI
IMPORTANT: à lire avant
d’utiliser l’appareil
MODO DE EMPLEO
IMPORTANTE: a leer antes de
utilizar el aparato
ANWENDUNGSVORSCHRIFTEN
WICHTIG: Vollständig vor der
Benutzung lesen
GEBRUIKSAANWIJZING
BELANGRIJK: Lees volledig voor
gebruik
INSTRUÇÕES DE UTILIZAÇÃO
IMPORTANTE: Ler antes de
utilizar.
ISTRUZIONI PER L’USO
IMPORTANTE: da leggere prima
di utilizzare l’apparecchio
INSTRUKTIONER
VIKTIGT: läs följande fullständiga
instruktioner för användningen
innan du använder laddaren
25.6V / 26.4V / 8s LiFePO
4
/ Lithium
Ferrous Phosphate 2Ah <-> 100Ah
Save Charge Maintain Test
Save Charge Maintain Test
1234
5678
copyright © 2019 TecMate International – TM280-IN1-190529

TecMate OptiMate Lithium 8s 5A Specifications

General

Output Current	5A
Input Voltage	100-240V AC
Battery Type	Lithium (LiFePO4, Li-ion, LiPo)
Charging Method	Multi-step charging algorithm
Charging Modes	Maintenance charge
Protection Features	Overvoltage, overcurrent, short circuit, reverse polarity, overheating

Summary

Instructions for Use

Safety Instructions and Preparation

General Safety Precautions

Personal Safety Precautions

Guidelines for personal protection, avoiding sparks, and handling battery acid.

Preparing to Charge

Steps and considerations before connecting the charger to the battery.

Charging Connection Procedures

Connecting Battery Inside Vehicle

Detailed steps for connecting the charger to a battery installed in a vehicle.

Connecting Battery Outside Vehicle

Detailed steps for connecting the charger to a battery removed from a vehicle.

Charging Process Steps

Connecting Charger to Battery

Instructions for making DC connections to the battery, emphasizing order and security.

Safe Temperature Charging

Charging Stages and Modes

Battery Connection and BMS Reset

Steps for connecting the battery and initiating BMS reset for deep discharge recovery.

Charge State and Testing

SAVE Mode and Low Voltage

Charge and Cell Damage Test

Advanced Charging and Maintenance

Optimize Cell Balancing

State of Charge Test

Test Results and Troubleshooting

Troubleshooting Suspended Charging

Explanation of LED #8 flashing rapidly and possible causes for charging suspension.