TecMate OptiMate Lithium 4s 9.5A User Manual

Automatic charger for 12.8V LiFePO
4
batteries
Chargeur automatique pour batteries
12.8V LiFePO
4
Cargador automático para baterías
12.8V LiFePO
4
Carregador automático para baterias
de 12.8V LiFePO
4
Automatisches Ladegerät für 12.8V
LiFePO
4
Batterien
Automatische lader voor 12.8V LiFePO
4
accu’s
Caricabatterie automatico per batterie
12.8V LiFePO
4
Automatisk diagnostisk laddare för
12.8V LiFePO
4
-batterier
MODEL: TM274 / TM275
TM276 / TM278
AC: 100 – 240VAC 50-60Hz
0.66A @ 240VAC 1.59A @ 100VAC
DC: 120W ¨12.8V 9.5A
Thermally adjusted
INSTRUCTIONS FOR USE
IMPORTANT: Read completely
before charging
MODE D’EMPLOI
IMPORTANT: à lire avant
d’utiliser l’appareil
MODO DE EMPLEO
IMPORTANTE: a leer antes de
utilizar el aparato
ANWENDUNGSVORSCHRIFTEN
WICHTIG: Vollständig vor der
Benutzung lesen
GEBRUIKSAANWIJZING
BELANGRIJK: Lees volledig voor
gebruik
INSTRUÇÕES DE UTILIZAÇÃO
IMPORTANTE: Ler antes de
utilizar.
ISTRUZIONI PER L’USO
IMPORTANTE: da leggere prima
di utilizzare l’apparecchio
INSTRUKTIONER
VIKTIGT: läs följande fullständiga
instruktioner för användningen
innan du använder laddaren
12.8V / 13.2V / 4s LiFePO
4
/ LFP / Lithium Ferrous Phosphate
2Ah <-> 120Ah
1234
copyright © 2018 TecMate International – TM274-275-276-278-IN1-180911
LFP
4s 9.5A

TecMate OptiMate Lithium 4s 9.5A Specifications

General

Brand	TecMate
Model	OptiMate Lithium 4s 9.5A
Category	Battery Charger
Language	English

Summary

Product Operation and Safety

Initial Setup and Instructions

General instructions and initial setup for charger operation.

Understanding LED Indicators

Explanation of LED indicators and their meanings.

Essential Safety Precautions

Critical safety warnings and personal precautions for charger use.

Charger Location and Connection Guidelines

Guidelines for charger placement and DC cable connection precautions.

Charging Process and Battery Management

Connecting and Initiating Charge

Steps for connecting the charger and starting the charging process.

Charging Time and Special Conditions

Estimated charging times and handling of special battery conditions.

Battery Management System (BMS) Reset

Procedure to reset the Battery Management System.

Diagnostic Testing and Low Voltage Charging

Performing diagnostic tests and low voltage charging modes.

Charging Phases and Test Result Interpretation

Understanding charging phases and interpreting diagnostic test results.

Long-Term Maintenance and Warranty

Guidelines for long-term maintenance and product warranty information.

Mounting and Accessories

Mounting Instructions

Instructions and diagrams for mounting the charger unit.