To Next PageTo Next Page
Need help?Do you have a question about the TecMate Optimate pro-8 and is the answer not in the manual?
General| Maximum Charging Current | 8A |
|---|---|
| Desulfation Mode | Yes |
| Battery Recovery Mode | Yes |
| Input Voltage | 100-240V AC |
| Output Voltage | 12V |
| Battery Types Supported | AGM, Gel, Lithium |
| Battery Capacity Range | 12V: 3 - 240Ah |
| Charge Stages | 9 stages |
| Battery Testing | Yes |
| Maintenance Mode | Yes |
| Cooling | Fan |
| Protection Features | Short circuit, reverse polarity |
| Display | LCD display with status indicators and diagnostic information |
General guidelines to reduce risks during charger operation and maintenance, including cord handling and appliance care.
Warnings about explosive gases generated by lead-acid batteries and precautions to prevent ignition.
Personal safety measures when working near lead-acid batteries, including eye protection and avoiding sparks.
Steps for preparing batteries for charging, including terminal cleaning, ventilation, and voltage checks.
Guidelines for charger placement, ventilation, and precautions for DC connection and disconnection.
Step-by-step guides for connecting the charger to batteries installed in or removed from a vehicle.
Procedures for safely disconnecting AC power and connecting/disconnecting DC clips in the correct order.
Instructions for charging multiple batteries, deep discharge recovery, and handling new batteries.
Special considerations and monitoring for deeply discharged or neglected batteries to prevent damage.
How to select charge voltage and explanation of charging stages, LED indicators, and battery verification.
Guidelines for maintaining batteries over extended periods and estimated charging durations.
Details on the product's limited warranty terms, coverage, exclusions, and regional differences.
