To Next PageTo Next Page
Need help?Do you have a question about the TecMate Optimate 5 and is the answer not in the manual?
General| Output Voltage | 12V |
|---|---|
| Protection Features | Short circuit, Overcurrent, Overvoltage, Reverse polarity |
| IP Rating | IP54 |
| Input Voltage | 100-240V AC |
| Charging Current | 0.8A |
| Battery Type Compatibility | Lead-acid, AGM, GEL, Lithium |
| Typical Charge Time | Varies based on battery condition and capacity |
| Charging Modes | Multi-stage charging, including desulphation, bulk charge, absorption, optimization and float maintenance |
Details the model numbers and AC/DC input/output specifications of the charger.
Lists compatible battery types (6V/12V) and capacity ranges, along with charging rates.
Provides essential usage instructions in multiple languages for user convenience.
Explains the function of LEDs and the Select-TOUCH sensor for operating the charger.
Details the charger's safety mechanisms for voltage detection and battery status checks.
Guides users on interpreting voltage readings during the test mode for battery health assessment.
Prohibits use with certain battery types and requires avoiding ground connections.
Covers safe use of extension cords, cord maintenance, and cleaning procedures.
Warns about explosive gases and specifies personal protective measures.
Outlines necessary steps before charging, including battery removal and workspace prep.
Advises on charger location and safe DC clip connection procedures to prevent sparks.
Provides detailed steps for connecting to batteries within a vehicle, covering polarity and grounding.
Offers step-by-step instructions for connecting to batteries removed from the vehicle.
Addresses hazards like explosive gases, battery acid, liquid exposure, and proper charger handling.
Details the sequence and method for safely connecting the charger's clamps to the battery terminals.
Provides information on typical charging duration and considerations for deeply discharged batteries.
Explains how to select voltage and the charger's protection against incorrect polarity connections.
Describes the process of measuring battery state to determine the appropriate charging stage.
Details the SAVE mode for low-charge batteries and the standard CHARGE mode.
Explains the OPTIMIZE mode for cell equalization and the TEST mode for charge retention.
Covers the automatic maintenance charge and float charging to preserve battery health.
Provides guidance on reviving deeply discharged or neglected batteries.
Helps users understand the meaning of test results and potential issues affecting them.
Advises on long-term battery maintenance and details the charger's eco power saving mode.
Outlines the warranty coverage, terms, and conditions for the charger.
Guides users on how to physically mount the charger using provided hardware.
Recommends placement near a vehicle and discusses options for extending cable length.
Encourages users to discover and purchase compatible accessories from the OptiMATE website.
Highlights the brand's assurance of battery performance and product reliability.
