TecMate Optimate 5 start/stop User Manual

INSTRUCTIONS FOR USE
IMPORTANT: Read completely
before charging
MODE D’EMPLOI
IMPORTANT: à lire avant
d’utiliser l’appareil
ANWENDUNGSVORSCHRIFTEN
WICHTIG: Vollständig vor der
Benutzung lesen
GEBRUIKSAANWIJZING
BELANGRIJK: Lees volledig
voor gebruik
MODO DE EMPLEO
IMPORTANTE: a leer antes de
utilizar el aparato
INSTRUÇÕES DE UTILIZAÇÃO
IMPORTANTE: Ler antes de
utilizar.
ISTRUZIONI PER L’USO
IMPORTANTE: da leggere prima
di utilizzare l’apparecchio
INSTRUKTIONER
VIKTIGT: läs följande fullständiga
instruktioner för användningen
innan du använder laddaren
Automatic charger for 12V lead/acid batteries • Chargeur automatique pour batteries 12V plomb-acide •
Cargador automático para baterías 12V plomo-ácido • Carregador automático para baterias de 12V chumbo/
ácido • Automatische Ladegerät für 12V Blei-Säure Batterien • Automatische lader voor 12V loodzuur accu’s •
Caricabatterie automatico per batterie 12V piombo-acido • Automatisk diagnostisk laddare för 12V blybatterier
• Автоматическое зарядное устройство для 12В свинцово кислотных аккумуляторных батарей •
Automatická nabíječka pro 12V olovo/kyselinové baterie
1 x 12V
EFB / STD / AGM / GEL
15 - 192Ah
+-
MODEL: TM220 / TM221 / TM226 (2016)
AC: 100 – 240VAC 50-60Hz
DC: 4A 12V
2V
13.6V
14.4V
1 23 4 56
TEST MAINTAINSAVE CHARGE
< 12.4V
6 STEPS
Low Volt
Start
(from 2V)
CHARGE
OptiMate
‘365’
Maintenance
56
Charge
retention
TEST
OPTIMIZEPULSE SAVE
6 STEPS
ИНСТРУКЦИЯ ПО ПРИМЕНЕНИЮ
ВАЖНО: Прочти полностью
перед использованием
CZ
INSTRUKCE PRO POUŽITÍ
DŮLEŽITÉ: Přečtěte si pozorně
před použitím
copyright © 2016 TecMate International
TM220-IN1-160502

TecMate Optimate 5 start/stop Specifications

General

Brand	TecMate
Model	Optimate 5 start/stop
Category	Battery Charger
Language	English

Summary

Instructions for Use

Important Safety Information

Read all instructions thoroughly before operating the charger for safe and correct use.

Safety Precautions

Battery Type Limitations

Specifies incompatible battery chemistries like NiCd, NiMH, Li-Ion, and non-rechargeable types.

Risk of Explosive Gases

Warns about explosive gases from batteries and the importance of following instructions.

Personal Precautions

Lists essential personal safety actions when working near lead-acid batteries.

Preparing to Charge

Battery Preparation Steps

Covers removing battery, ventilation, terminal cleaning, water levels, and voltage checks.

Charger Location

Guidelines for placing the charger away from the battery and ensuring proper ventilation.

DC Connection Precautions

Instructions for connecting and disconnecting DC clips, including polarity and safety.

Connecting the Charger

Connecting Battery in Vehicle

Step-by-step guide for connecting charger clips to a battery installed in a vehicle.

Connecting Battery Outside Vehicle

Detailed instructions for connecting the charger to a battery that has been removed from the vehicle.

Proceeding to Charge

Understanding LED Indicators

Explanation of the function and meaning of each LED indicator on the charger.

Charging Stages Explained

Details the 'SAVE', 'TEST', 'BULK CHARGE', and 'OPTIMIZE' stages of the charging process.

Voltage Retention Test

Describes the process for testing the battery's ability to retain charge after charging.

Test Results and Maintenance

Interpreting Test Results

Guidance on understanding test outcomes, including potential problems and irrecoverable batteries.

Maintenance Charge Mode

Explanation of the steady maintenance charge and voltage retention test alternation.

Limited Warranty Information

Details the warranty period, terms, and conditions for the OptiMate charger.

Accessories

OptiMate Hook TS-252

Information on the TS-252 hook accessory for hanging the charger.

OptiMate Cable 0-13 / 0-23

Details on the 6.4m / 15ft OptiMate cable accessory for extended reach.