TecMate Optimate 4 User Manual

Automatic charger for 12V lead-acid batteries
• Chargeur automatique pour batteries 12V
plomb-acide • Cargador automático para
baterías 12V plomo-ácido • Carregador
automático para baterias de 12V chumbo-
ácido • Automatische Ladegerät für 12V Blei-
Säure Batterien • Automatische lader voor 12V
loodzuur accu’s • Caricabatterie automatico
per batterie 12V piombo-acido • Automatisk
diagnostisk laddare för 12V blybatterier
1 x 12V
STD / AGM-MF / GEL
3 - 50Ah (max. Ah rating based
on 48 hour charge).
+-
MODEL: TM350 / TM351 / TM352
AC: 100 – 240V 50-60Hz
0.15A @ 240V / 0.28A @ 100V
DC: 12V 1A
INSTRUCTIONS FOR USE
IMPORTANT: Read completely
before charging
MODE D’EMPLOI
IMPORTANT: à lire avant
d’utiliser l’appareil
MODO DE EMPLEO
IMPORTANTE: a leer antes de
utilizar el aparato
ANWENDUNGSVORSCHRIFTEN
WICHTIG: Vollständig vor der
Benutzung lesen
GEBRUIKSAANWIJZING
BELANGRIJK: Lees volledig voor
gebruik
INSTRUÇÕES DE UTILIZAÇÃO
IMPORTANTE: Ler antes de
utilizar.
ISTRUZIONI PER L’USO
IMPORTANTE: da leggere prima
di utilizzare l’apparecchio
INSTRUKTIONER
VIKTIGT: läs följande fullständiga
instruktioner för användningen
innan du använder laddaren
PROGRAM 2 - STANDARD / DIRECT CHARGE : 9 STEPS
Low Volt
Start (0.5V)
1 3
Controlled
CHARGE
6
OPTIMIZE
7
TEST after
CHARGE
8
OptiMate
‘365’
maintenance
95
Pulse
SAVE
4
SAVE
sulphated
battery
2
TEST
before charge
PULSE
‘wake up’
PROGRAM 1 - CAN-bus (BMW) : 8 STEPS
CAN-bus
‘wake up’
pulse
1 3
Controlled
CHARGE
5
CAN-bus
OPTIMIZE
6
CAN-bus
TEST after
CHARGE
7
OptiMate
‘365’
maintenance
84
Pulse
SAVE
2
TEST
before charge
CAN-bus
low volt
check
CAN-bus
edition
copyright © 2016 TecMate International – TM35x-IN1-161117

TecMate Optimate 4 Specifications

General

Output Voltage	12V
Charging Current	0.8A
Battery Capacity Range	3-50Ah
Desulfation	Yes
Weatherproof	Yes
IP Rating	IP54
Input Voltage	100-240VAC 50-60Hz
Battery Types	AGM, GEL
Type	Automatic
Protection Features	Reverse polarity, short circuit

Summary

OptiMATE 4 Charger Overview and Programs

Automatic 12V Lead-Acid Battery Charging

Explains the core function of automatic charging for 12V lead-acid batteries.

Essential Safety Instructions for Canada & USA

Battery Type Compatibility Warning

Crucial warning against using incompatible battery chemistries like NiCd, NiMH, Li-Ion.

Class II Appliance and Grounding Precautions

Safety advice for Class II appliances, emphasizing no grounding connection.

Risk of Explosive Gases from Batteries

Highlights the danger of explosive gases produced by batteries during operation.

Personal Safety Measures During Charging

Essential personal precautions to take when working near batteries.

Preparing the OptiMATE 4 Charger for Use

Optimal Charger Placement Guidelines

DC Connection Safety Procedures

Critical safety precautions to follow when connecting DC output clips to the battery.

Connecting to a Battery Installed in a Vehicle

Step-by-step guide for connecting the charger to a car battery.

Connecting to a Battery Outside a Vehicle

Step-by-step guide for connecting the charger to a standalone battery.

OptiMATE 4 Battery Connection and Charging Process

Pre-Operation Reading of Charger Instructions

Emphasizes the importance of thoroughly reading all user instructions before use.

General Safety Warnings and Notes

Provides essential safety warnings and important notes for user guidance.

Charger Protection Against Liquid Exposure

Understanding the Dual Charging Programs

Advanced Operation and Support for OptiMATE 4

Recovering Very Flat or Neglected Batteries

Guidance on how to recover deeply discharged or neglected batteries.

Interpreting Battery Test Results