13
translation of the original instrUctions EN
Never disassemble the balancer. Maintenance is to be carried out only by skilled, authorized personnel.
Warranty
The use of non-original TECNA S.p.A. spare parts will negatively affect safety and performance and, in any case, it will void the warranty.
The rope and the drum-spring are not covered by warranty.
Disposal
At the end of the work life of the balancer, proceed as follows:
- Rewind the rope completely
- Unhook the load from the balancer
- Unhook the balancer from the primary and safety connections.
- Proceed to fully discharge the balancer spring.
Once the balancer has been discharged, it must be disposed of complying with the rules and regulations in force.
To Next Page
Loading...