8
ATTENTION: instructions marked by symbol are critical for the use of the balancer in environments with
potentially explosive atmospheres.
WARNING: this device is suitable only for use in environments having potentially explosive atmospheres for
GAS, DO NOT use this device in environments having potentially explosive atmospheres for DUST.
Install the balancer before using it. This operation is to be carried out by skilled personnel who must comply
with the directions outlined in this manual:
A WRONG INSTALLATION COULD CAUSE INJURY/DAMAGE TO PEOPLE/PROPERTY.
This manual contains important information in order to use the balancer safely.
Be sure to have clearly understood all the instructions before using the balancer.
FAILURE TO DO SO COULD CAUSE INJURY.
The balancer was built in conformity with European Community Directives that were pertinent and applicable when the balancer was
put on the market and that entail the CE marking of the product.
intenDeD Use
The balancer is intended to be used indoors with temperatures between 5°C and 60°C.
Using the balancer at temperatures beyond this range could lead to premature deterioration of
the balancer or some of its components.
For a better use of the balancer, it is recommended that the load is suspended at the centre of gravity.
It is necessary to use, inspect and maintain the balancer in perfect working efciency in accordance with every
regulation with regard to balancers, tools and workplaces.
Balancer capacity from minimum to maximum value expressed in kg;
Balancer rope length expressed in mm;
Balancer mass in kg.
EN translation of the original instrUctions
Description of the plate
Manufacturer
AtEX Marking
Item Code
Admissible Capacity Range
Stroke
Year of manufacture/Serial no.
Balancer Weight
Attention Symbols
Product Markings
Address
To Next Page
Loading...