Tecno POP 5 - Eu Declaration of Conformity

09
in accordance with
Annex VI of Directive 2014/53/EU of the European Parliament
and of the Council
1.For the following Radio equipment:
Model: BD2
Product: Mobile Phone
Trade name or Brand: TECNO
Software / Hardware number: BD2-SP613ABC-QGo/V1.0
2. Name and address of the manufacturer or his authorised
representative:
Manufacturer: TECNO MOBILE LIMITED
Add: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE
31-35 SHAN MEI STREET FOTAN NT
3. This declaration of conformity is issued under the sole
responsibility of the Manufacturer.
4. Object of the declaration (identification of the radio
equipment allowing traceability; it may include a colour image of
sufficient clarity where necessary for the identification of the
radio equipment):
5. The object of the declaration described above is in
conformity with the relevant Union harmonization legislation:
Directive 2014/53/EU (RED)
6. References to the relevant harmonised standards used or
references to the other technical specifications in relation to
which conformity is declared:
Article 3.1a Health: EN 50360:2017
EN 50566:2017
EN 62479:2010
EN 62209-1:2016
EN 62209-2:2010
Article 3.1a Electrical Safety: EN62368-1:2014+A11:2017
Article 3.1b: ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-17 V3.2.4 (2020-09)
ETSI EN 301 489-19 V2.1.1 (2019-04)
Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
EN55032:2015
EN55035:2017
EU DECLARATION
OF CONFORMITY