Tecnoalarm TP8-64 MET

Need help?

Do you have a question about the Tecnoalarm TP8-64 MET and is the answer not in the manual?

Summary

General Features of the TP8-64 Control Panel

System Codes and User Levels

Explains master and standard user codes, their privileges, and default codes.

Master Menu Functions

Details programming capabilities accessible via the master code.

Control via Telephone Line

Signaling and LED Indicators

LED Signaling on Consoles

Describes the function of various LEDs on the LCD200 console.

LCD300;S Console LED Indicators

Details the LED functions for the LCD300/S console, including keypad and status LEDs.

Alarm LED Signaling (Red)

Explains the meaning of the red alarm LED for program and general alarms.

Battery and Mains LED Status

Program Status LED (Yellow)

Explains the yellow LED for program status, including stand-by, arming, and partset.

Programming Operations

Program Creation and Modification

Guide on creating and modifying system programs, including zone association.

Timers and Access Periods Setup

Telephone Parameter Programming

User and Master Code Programming

Instructions for programming master and standard user codes and their attributes.

Electronic Key Programming

Wireless Key Configuration

System Testing Procedures

Enabling Remote Access

Control Operations via Console

Arming Programs with Console

Step-by-step guide for arming programs using master or user codes.

Disarming Programs via Console

Instructions for disarming programs using master or user codes.

By-Pass Functionality

Remote Control Operations

Viewing Event Buffer and Alarm Memory

Keypoint Control Interfaces

TP SK6 N Key Reader Operation

Using the TP SK6N reader for arming, disarming, and by-pass with electronic keys.

TP SKN Interface Control

TP SDN Electronic Keypad Control

Using the TP SDN keypad for arming/disarming and by-pass with codes.

TX240-3 Wireless Key Functions