54
Instruction and maintenance manual
ENGLISH
4.1.2 Series
QX, MILL TEC and SQ/HD
Systems with high density poles suitable for small/
medium magnetic chucks. These models have large
magnetic surfaces and can therefore be used to
clamp parts with small and medium dimensions.
4.1.3 Series QX and SQ/HP
These systems, which can be congured in version
ST or HD, offer the power required to machine parts
with discontinuous surfaces. They are ideal to rough
non machined or forged parts because of the com-
bination of a high clamping force and wide-ranging
magnetic eld.
To Next Page
Loading...