42
Instruction and maintenance manual
ENGLISH
1
GENERAL NOTES &
Thank you for purchasing one of the many products
manufactured by TECNOMAGNETE S.p.A.
This manual is designed to help you become familiar
with your new system and must therefore be care-
fully read and followed.
Should you require any further information regarding
the system, please contact the TECNOMAGNETE
service department.
The descriptions and illustrations provided in this
manual are for reference only.
While guaranteeing the basic features specied for
each type of equipment, TECNOMAGNETE S.p.A.
reserves the right to change at any time and without
notice the parts, details and accessories that it
deems necessary for engineering or commercial rea-
sons or in order to improve the product. The neces-
sary updates, if required, shall be supplied as attach-
ments.
This manual is property of TECNOMAGNETE S.p.A.
and cannot be copied (in part or in whole) or made
available to third parties without the written consent
of the manufacturer. Should the products be amend-
ed and/or updated, upon authorization of TEC-
NOMAGNETE S.p.A., the manufacturer shall inte-
grate the existing manual by providing the text
explaining the use of the modied/integrated com-
ponent along with a description of potential residual
risks.
1.1 Overview of the company
TECNOMAGNETE started its activities in 1972 as
manufacturer of permanent-electro magnetic sys-
tems designed to ensure power, exibility and maxi-
mum safety. Its state-of-the-art technologies and the
patents developed over the years have enabled the
company to become a leading supplier in several
international markets.
The permanent-electro magnetic systems manufac-
tured by TECNOMAGNETE are able to produce all
the magnetic force required both to clamp and lift
parts, thus eliminating the need of using electric
power during machining.
Its main elds of activity include:
CLAMPING SYSTEMS FOR TOOL MACHINES
•
Grinders
•
Millers
•
Lathes
•
Systems for the machining of rails
MOLDING SYSTEMS
•
Systems designed to clamp the molds onto
presses
LIFTING SYSTEMS FOR LIGHT LOADS
•
Manual lifters
•
Battery operated lifters
LIFTING SYSTEMS FOR HEAVY LOADS
•
Magnetic lifters
•
Fixed crossbeams to support magnetic mod-
ules
•
Telescopic crossbeams to support magnetic
modules
TECNOMAGNETE has installed approximately
50,000 units in over twenty years, thanks mainly to
its wide-ranging offer, its exibility to meet custom-
ers’ requirements and its efcient post-sales serv-
ice.
To Next Page
Loading...