TECNOMOTOR 820 - Inserting the Exhaust Gas Sampling Probe into the Exhaust Tail Pipe of the Vehicle; Installing the Software on a Computer (dir Module)

10
9 Inserting the exhaust gas sampling probe into the exhaust tail pipe of the vehicle
In the case of tests on industrial vehicles, fit the
specific centraliser on the exhaust gas sampling
probe
Insert the probe inside the tail pipe of the
vehicle to be tested. The probe is equipped with
a special clip for fixing the exhaust gas
sampling probe to the vehicle exhaust tail pipe
10 Installing the Software on a Computer (DIR module)
The following pictures offer a quick guide to installing the software on your
Computer.
The operations may only be carried out by experienced and authorised personnel. The
manufacturer is not liable for problems caused to the Computer by unauthorised
personnel.
Insert the Pen-drive into the player and follow the instructions on the screen.
Press Next to continue the installation.
From here you can change the path of the
installation files.( Do not change)