4
CAUTION
z Do not touch the heat-sink base during operation.
z The T-verter can be easily operated from a low-speed to high-speed range. Please
reconfirm the operating range of motor and the machinery you are controlling.
z Do not examining the signals on the PCB of the T-verter when it is under operation.
z All T-verters are properly adjusted and set before delivery.
CAUTION
Do not proceed with disassemble or examination procedure before ensuring that the
power is off and the Power LED extinguished.
When performing an examination or maintenance
CAUTION
The environment temperature should be within –10
O
C ~ +40
O
C and humidity under
95% RH without condensing. Besides, the T-verter should be free from water dripping
or metal dust.
Others
WARNING
Never modify the product.
Failure to observe this warning can result in an electrical shock or personal injury and
will invalidate the guarantee.
.
To Next Page
Loading...
